04-1077

Effect of the Casting Methods on Microstructure and Room Temperature Mechanical Properties of K4800 Superalloy

Wanqi Jie, Guangyu Yang, Zhiyong Kan, Hao Wu

04-1092

As-Cast Microstructure of the Heat-Resistant René N5 Nickel-Based Superalloy

Łukasz Rakoczy, Małgorzata Grudzień-Rakoczy, and Rafał Cygan

04-1110

Data-Driven Approach in Ni-Based Superalloy Investment Casting Component Optimization

Zhengyi Ding, Donghong Wang, Da Shu, Baode Sun, Bang Guan, Jiayu Cui

04-1153

Study on Coarsening Behavior of γ' Precipitates and Compression Properties in a Novel Co-Ni-Al-W Superalloy

Cheng Zhou, Lei Jin, Gaoyang Jing, Boyan Yu

04-1182

As-Cast Microstructure of the Alloy 700 Nickel-Based Superalloys Fabricated Via Lost-Wax Casting

Rafał Cygan, Konrad Chrzan, Krzysztof Jaśkowiec, and Małgorzata Grudzień-Rakoczy

04-1183

Microstructural Changes of Ni-Based Superalloy After GTA Welding with Induction Preheating

Rafał Cygan, Konrad Chrzan, Krzysztof Jaśkowiec, and Małgorzata Grudzień-Rakoczy,

04-1211

Study on Microstructure and Properties of a New High Temperature, High Strength and High Plastic Titanium Alloy

H. J. Li, S. B. Liu, T. Y. Liu, J. Zhao, K. Shi, C.Y.Li, X. Q.Li

04-1216

Effect of Cold Crucible Levitation Melting Process on the Solidification Microstructure and Tensile Properties of K4169 Casting

Yipeng Li, Aoqi Li, Guoyan Shui, Xun Sun

04-2032

Solidification Characteristics and Defect Formation Mechanism of the Fourth Generation Ni-Based Single Crystal Superalloy

Wenchao Yang, Jun Zhang, Lin Liu

04-2040

Nucleation and Transition Sequences of TCP Phases During Heat-Exposure in a Re-Containing Ni-Based Single Crystal Superalloy

Chen Liu, Wenchao Yang, Jun Zhang, Lin Liu

04-2041

Effect of Low angle Grain Boundary on the Microstructure and Mechanical Properties in a Fourth Generation Nickel Based Single Crystal Superalloy

Qiang Wang, Wenchao Yang, Jun Zhang, Lin Liu

04-2042

Investigation on Orientation Control of Single Crystal Blades Through a Using of Heterogeneous Seeds

Jiarun Qin, Wenchao Yang, Jun Zhang, Lin Liu

04-2049

The Effect of B4C on Microstructure and Mechanical Properties of Nb-Si Based Superalloy

Xiaowei Wang, Qi Wang, Ruirun Chen

04-2051

Microstructure and Room-Temperature Fracture Toughness of Nb-Si Alloy with Addition of Mn

Tianyu Zhao, Qi Wang, Ruirun Chen

04-2054

Optimization of Microstructure and Fracture Toughness of  Nb4FeSi-Containing Nb-Si Based Alloy Using V, Zr and C Elements

Qibin Wang, Qi Wang, Ruirun Chen

04-2055

Effect of Ultrasonic Assisted Solidification on Microstructure and Mechanical Properties of Nb-Si Alloy

Qi Wang

04-2063

Optimization of Solid-Liquid Bimetallic Casting Process Parameters for Dual-Performance Blade

Jinlin Li, Tiantian Wang, Hongyu Xu, Bo Jiang, Ye Wang, Maoliang Hu

04-2082

Effect of Al, Ti and W on Microstructure and Properties of High Tungsten K416B Superalloy

Xiang Fei, Naicheng Sheng, Yuping Zhu, Jun Xie, Jinjiang Yu, Guichen Hou,

04-2084

Carbon Addition and Temperature-Dependent Tensile Properties of a Low-Cost 3rd-Generation Ni-Based Single Crystal Superalloy

Yongmei Li, Xinguang Wang, Zihao Tan, Jinguo Li, Yizhou Zhou, Xiaofeng Sun

04-2085

Micro-Scale Damage Mechanisms and Life Prediction Method of the Fourth-Generation Single Crystal Superalloy During Thermal-Mechanical Fatigue

Zihao Tan, Chenglu Zou, Xinguang Wang, Jianchao Pang, Jinguo Li, Zhefeng Zhang, Xiaofeng Sun, Yizhou Zhou

04-2086

Effects of Powder Forming Method and Heat Treatment Process on the Microstructure and Mechanical Properties of a Ni-Based Superalloy by Laser Additive Manufacturing

Zhipeng Zhang, Jide Liu, Jianjun Wang, Jinguo Li

04-2089

Investigate Tensile and Stress Rupture Behavior of Crystallographic Lamellar Microstructure in Ni Superalloy Prepared by Laser Powder Bed Fusion

Peng Wang, Wei Song, Yi Qiu, Jingjing Liang, Yuping Zhu, Yingju Li, Jinguo Li

04-2090

Effect of Temperature on High-Cycle Fatigue Behavior of A W-rich Nickel-Based Superalloy

Jun Xie, Maokai Chen, Wu Hao, Li Qi, Fengjiang Zhang, Hongyu Chai, Yuejiao Ma,  Jinjiang Yu, Jinguo Li

04-2121

Study on the Counter Gravity Adjusted Pressure of Large and Complex Thin-Wall Ni-Based Superalloy Components

Baode Sun, Anping Dong, Dafan Du, Lianghua Xiong, Lin He, Dashan Sui

04-2205

The Formation Mechanism of Abnormal Grains of Superalloys Used for the Turbine Blade

Shijie Sun, Naicheng Sheng, Guichen Hou, Jinguo Li, Yizhou Zhou, Xiaofeng Sun

04-2214

Microstructural and Mechanical Properties of Extremely Long-Term Thermal Exposed Superalloy Mar-M247After Rejuvenation Heat Treatment

Song Wu,Xiufang Gong, Zhenhuan Gao, Nieliping, Changshuai Wang, Lexin Yang, Chao Luo

04-2241

Freckle Defect Prediction for Single Crystal solidification of Superalloys

Xiaoshan Liu, Dexin Ma, Jianzheng Guo

04-2261

Study on Ceramic Cores for Directional and Single Crystal Castings

Xinli Guo, Zhongliang Lu, Lei Jin, Dichen Li, Ling Zhang, Guoyan Shui, Kai Miao

04-2264

Effect of Mo Addition on the Microstructure and Creep Property of Ni- Based Single Crystal Superalloys

Yuan Cheng, Xinbao Zhao, Yuefeng Gu, Quanzhao Yue, Wanshun Xia, Ze Zhang

04-2297

Study on the Effect of Static Magnetic Field on the Nickel-Based Superalloy Fabricated by Additive Manufacturing

Dafan Du, Anping Dong, Baode Sun