Part 3：High Entropy Alloy_THE 75th WORLD FOUNDRY CONGRESS-THE 75th WORLD FOUNDRY CONGRESS

Home > E-Abstract Book > Part 3：High Entropy Alloy

Part 3：High Entropy Alloy

	Part 3：High Entropy Alloy
03-1011	On the Characterization of Microstructure of High-Pressure Die-Cast Alloys with High Thermal Conductivity
	Yixian Liu, Yongchang Liu, Sujing Ge, Shoumei Xiong
03-1019	In-Situ Observation the Growth of Fe-Rich Intermetallic Particles During Solidification by Synchrotron X-Ray Imaging
	Yuliang Zhao, Dongfu Song, Weiwen Zhang
03-1057	Effects of Ni Contents on Microstructure and Mechanical Properties of Al-8Ce Alloy
	Chong Lin, Binteng Huang, Yanwei Wang, Shulin Lü, Shusen Wu
03-1076	NumericalStudy on Dynamic Evolution of a Dual-Frequency Driven Cavitation Bubble in Magnesium Alloy Melt
	Zhaoyang Yin, Qichi Le, Qiyu Liao, Tong Wang Lei Bao, Dazhi Zhao
03-1086	Effect of Two-Stage Aging on the Mechanical Properties of Al-Li Alloy
	Youjie Guo, Liang Zhang, Guohua Wu
03-1117	The Study of Extrusion Casting on the Microstructure and Properties of Hypereutectic Al-Si Alloy
	Yunguan Zhang, Zhiyong You, Mengjun Zhang, Libo Wang, Chunlian Liu
03-1128	Enhanced Mechanical and Damping Properties of Mg-8Zn-1.5Al-0.5Y Alloys By Rheo-Squeeze Casting
	Xiaogang Fang, Yeliang Zhu, ZiyunYuan
03-1129	Thermoelectric Properties Study of ZrCoSb-Based Medium- and High-Entropy Half-Heusler Alloys
	Rongchun Chen, Huijun Kang, Tongmin Wang
03-1132	Effect of Extrusion Casting and Refining Process on Strength and Elongation of 4032 Aluminum Alloy
	Wanneng Liao, Chenxing Zhang, Zhongde Shan, Wenzhe Song, Xixi Dong,
03-1145	Current-Carrying Wear Characteristics of Cast Al-Cu Alloys
	Junwen Zhao, Yongxin Zhang, Hanzhi Feng, Lei Xu, Jing Han
03-1148	Process Optimization and Wearing Characterization of As-Cast and Heat-Treated Cocrfemnni(Alx) High Entropy Alloy
	I. Vicario, E. Villanueva, J. Albizuri, T. Guraya, L. Armendariz, O. Gordo, P. Garcia-Michelena3.
03-1151.	Analysis of Nucleation Characteristics and Grain Growth Dynamics in Aluminum and Its Titanium Alloys: A Molecular Dynamics Simulation Study on Critical Nucleus Size, Nucleation Rate, and the Effects of Growth Restriction Factors Based on the MFPT Method
	Run Wang, Haijun Huang
03-1155	Investigation on Heat Treatment Process Optimization of Super-Slow-Speed Die Casting A356.2 Alloy
	Lu Zhang, Hengcheng Liao, Jiang Li, Liangchao Tang
03-1167	Self-Cooling Hollow Mold With Containing Water and Its Effect on Microstructure and Mechanical Properties
	Jingying Xu, Jinwu Kang, Weimin Mao
03-1171	Study on the Microstructure and Mechanical Properties of High Strength and Toughness Al-9Si-Mn-Mg-xCu Casting Alloy
	Dongxue Yang, Dezhi Zhu
03-1173	Effect of T6 Treatment on the Microstructure and Properties of Mg-Zn-Ce with Different Zn Contents
	Aoxue Jiang, Zhiyong You, Shuaishuai Jin, Chunle Sun, Kaiying Wang
03-1177	Comparative Analysis of Chinese and Foreign Die Casting Aluminum Alloy Standards
	Guanghua Qin, Jiahui Zhu, Yin Zhang, Shifang Su
03-1179	Microstructure and Mechanical Properties of Shock Tower Manufactured Using Non Heat-Treated Aluminum Alloy
	Yongfei Li, Chaohang Jia, Jianzhong Li, Pan Fan, Haibo Qiao, Chao Ma, Haifeng Liu
03-1185	Research Progress of Modeling and Casting Technology of Zirconium Alloy
	Chunling Bao, Dehua Jin, Youwei Zhang, Ning Zhao, Ye Yue, Jiawei Li, Haitao Yang
03-1193	Calculation of Volatilization Behavior of Alloying Elements During Electron Beam Melting of Near-Α Titanium Alloy
	J. J. Mao, J. Zhao, Y. Tan，S. B. Liu, K. Shi, Z.Y. Zhang, T. Y. Liu
03-1198	Microstructures and Mechanical Properties of Cast Mg-Zn-Y-Zr Mg Alloys
	Ming Sun, Dequan Shi, Guangkui Cheng
03-1213	In Situ Determination of Nonmetallic Inclusions in AlMg6Si2MnZr Alloy
	Primož Mrvar, Mitja Petrič, Sebastjan Kastelic, Matic Žbontar
03-2015	Research on the Tight Fit Technology of New Fuel Element Based on Spinning Necking Forming
	Zeming Wang, Jialong Chen, Xianmeng Tu, Xiaoyuan Ji, Jianxin Zhou
03-2024	Effects of Squeeze Casting and Heat Treatment on Properties of Low-Cost Mg-Si-Zn-Cu Alloy
	Lu Chen, Jianyu Li, Shulin Lü,Wei Guo, Shusen Wu
03-2026	Effect of Al2Y on the Microstructure and Properties of Continuous Squeeze Casting-Extrusion Mg-Y-Al Alloy
	Shilong Li, Dijia Zhao, Jianyu Li, Shusen Wu, Shulin Lü
03-2029	Rapid Preheating to Preserve the Initial Microstructure of the Squeeze Casting AZ31 Billet and Effect on Subsequent Hot Extrusion
	Dijia Zhao, Shulin Lü, Zhaoxiang Yan, Wenbo Guo, Shusen Wu, WeiGuo
03-2031	Understanding the Bronze Casting Techniques in the Late Shang Dynasty Through the Solidification Process Simulation of Anyang Niuzun
	Huan Yang, Minghui Fang, Yuling He, Junchang Yang
03-2034	Multiscale Simulation of the Effect of Axial Magnetic Field on Macrosegregation and Solidification Structure During Vacuum Arc Remelting of TC17
	Junjie Li, Panyue Li, Jie Guo, Chenbao Xu, Jincheng Wang, Liqing Huang, Kai Fan
03-2038	The Role of Minor Oxygen on Tensile Propertiesin Cast Ti-6Al-4V Alloy
	Yuqing Song, Guodong Wang,Sisi Xie, Mingxiang Zhu, Chunhua Yue, Hongchao Kou
03-2039	Characteristics of α Precipitated Phase and Tensile Properties of Cast Ti5553 Alloy
	Guodong Wang, Yuqing Song, Mingxiang Zhu, Chunhua Yue, Xiangyi Xue, Hongchao Kou
03-2052	Corrosion Behavior of Ti-6Al-xV-2Sn-0.5Cu-yFe Alloys
	Chaowen Zheng, Qi Wang, Ruirun Chen
03-2058	Effect of Heat Treatment on the Microstructure and Mechanical Properties of Cast Mg-5Y-3Nd-3Zn-0.6Zr Alloy
	Haojie Wang, Yicheng Feng,Tao Wang,Yuanke Fu, Lei Wang, Erjun Guo
03-2059	Effect of Cu Addition and Heat Treatment on the Microstructure and Properties of ZL114A
	Zhao Na, Fuwei Kang, Enhao Wang, Linlin Zhang, Bingpeng Zhang
03-2060	Microstructure Evolution of the Al-Zn-Mg-Cu Alloy During Solidification under Electric Pulse
	Kaijiao Kang, Shengsong Wang, Shunde Jiang, Dayong Li, Yicheng Feng
03-2062	Effect of Cu and Mg Content on Microstructure and Mechanical Properties of Cast Al-Si-Cu-Mg Alloy
	Ning Zhang, Yicheng Feng, Yuanke Fu, Lei Wang, Erjun Guo
03-2064	Effect of Directional Solidification on the Thermal and Mechanical Properties of Al-Cu Alloy
	Xu Liu, Wentao Jiang, Hongyu Xu, Bo Jiang, Ye Wang, MaoliangHu, Bo Yu
03-2075	Study of the Microstructure and Mechanical Properties of Novel As-Cast Titanium Alloys Containing Ta
	Chuntong Wang, Binguo Fu, Yufeng Wang, Tianshun Dong, Jingkun Li, Guolu Li, Jinhai Liu
03-2087	Effect of Cooling Rate on the Structure of Cast Ti-20.5al-15Nb-1Mo Alloy
	LiangliangLiu, Dong Liu, Yuyou Cui, Rui Yang
03-2098	Effect of Alloy Contents on Shrinkage Porosity Defects in Mg-xY Cast Alloys
	Chuangming Li, Ang Zhang, Jiangfeng Song, Zhihua Dong, Bin Jiang, Fusheng Pan
03-2099	Enhancing Mechanical Property Consistency in AE81 Alloy Low-Pressure Die-Casting Wheels Through Ca Addition
	Ziwen Li, Tian Li, Bing Jiang, JiangFeng Song, Fusheng Pan
03-2100	Low Cost High Performance HPDC AM60 Based Alloys for Super-Sized Integrated Automotive Components
	Jing Wang,Jiangfeng Song, Bin Jiang, Fusheng Pan
03-2124	Multi-Scale Microstructure Regulation and High-Temperature Strengthening Mechanism of Ti2AlC/TiAl Composites Prepared by Vacuum Melting
	Pei Liu, Jingpei Xie, Aiqin Wang, Zhe Deng, Zhenbo Wang
03-2126	Effects of Heat Treatment on the Thermal Properties of A356 Aluminum Alloys in Different Casting Processes
	Xiaomei Luo, Yuandong Li, Wenjing Liu, Jin Qiu, Lu Sun, Hongwei Zhou, Guangli Bi
03-2128	Study of the Interaction Between Tensile Properties and Thermal Conductivity of Al-X (X=Si, Mn, Mg) Alloys
	Wenjing Liu, Yuandong Li, Zichen Wang, Xiaomei Luo, Hongwei Zhou, Guangli Bi
03-2134	A Heterogeneous Magnesium Extrusion Alloy with Ultra-High Plasticity
	Chenhui Li, Hua Hou, Ruifeng Dong, Yuhong Zhao
03-2135	Variations in Recrystallization Kinetics of Magnesium Influenced by <11-20>Twinning During the Hot Rolling Process
	Huanqing Li, Zhuo Song, Yuntao Zhang,Hua Hou, Yuhong Zhao
03-2136	Changing the Shape of the Second Phase Distribution Improves the Mechanical Properties of Mg-6.7Y-2.5Zn Alloy by Adding Trace Ta
	Limin Li, Pengya Lei, Zhuo Song, Huanqing Li, Liwen Chen, Hua Hou, Yuhong Zhao
03-2150	Influence of Heat Treatment Process on Microstructure and Properties of Indirect Squeeze Casting ZM5 Magnesium Alloy baffle
	Hua Hou, Jianhui Jing, Liwen Chen, Yuhong Zhao
03-2151	A Novel Type of Mg-Zn-Cu Alloys with High Thermal Conductivity
	Wei Liu,Yuntao Zhang, Hou Hua,Yuhong Zhao
03-2152	Effects of Zn Content and Heat Treatment Process on Microstructures and Mechanical Properties of Al-2Li-1Cu-3Mg-xZn-0.2Zr Cast Aluminum Alloys
	Jinzhong Tian, Boling Li, Zhenghao Bai, Shengjie Ma, Hou Hua, Yuhong Zhao
03-2155	A Novel High-Strength and High Modulus Mg90Y4Zn2Ni4 Alloy
	Wenyu Liu, Wei Liu, Hua Hou, Yuhong Zhao
03-2156	Reinforcing Mechanical Properties of AZ31 By in Situ Autogenous Mg2Si
	Chuan Shuai, Wei Liu, Hua Hou, Yuhong Zhao
03-2158	Effects of thermal Compression on Thermal Conductivity and Mechanics of Mg-Zn-Cu alloys
	Taoze Xie, Wei Liu, Hua Hou, Yuhong Zhao
03-2174	Study on Prediction Method of Mechanical Properties of Casting Al-9Si-2Cu-0.4Mg Alloy
	Jiayi Liu, Zhijun Feng, Yufei Li, Junjie Xiong, Zehua Li, Shiwei Xin
03-2193	Analysis of Heating Condition of Copper Crucible in Vacuum Suspension Furnace Melting Process
	Jingyan Liu, Zhizhong Liu, Pengcheng Zhang, Yongliang He, Fuli Zhang, Xiaoming Kang, Wanqing Li, Bo Dou, Shaowei Wen
03-2250	Lightweight Single-Phase Al-based Complex Concentrated Alloy with High Specific Strength
	Yuan Wu, Mingliang Han, Qiaoshi Zeng, Zhaoping Lu
03-2257	Nano Particles Reinforced and Directional Solidification in High Entropy Alloys
	Ruirun Chen, Gang Qin, Xu Yang
03-2263	Innovative Design and Future Development of Chemically Complex Intermetallic Alloy
	T. Yang, C. T. Liu, B. Xiao, Y. L. Zhao
03-2269	Tuning Microstructure and Mechanical Properties of Additively Manufactured CoCrFeMnNi High Entropy Alloy by Deep Cryogenic Treatment
	Yongjiang Huang
03-2277	Improvement in the Mechanical Properties of AlNbTiVCrNi1.5 High Entropy Alloys Containing Alloyed C
	Fangdong Xu, Dezhi Chen, Ruirun Chen
03-2278	Effect of Directional Solidification on Microstructure Evolution and Mechanical Properties of Eutectic High Entropy Alloy
	Xu Yang, Dezhi Chen, Shu Wang, Gang Qin, Ruirun Chen, Jingjie Guo

SUPPORTED BY

Developing Foundry